Xtralis FTD-8865-S Failsafe VIS-IR Thermography Detector

Xtralis VIS-IR is a standalone edge device for early fire detection and communicates directly with FACP using on-board Pre-Alarm, Alarm and Fault relays avoiding the ever-present failure risk associated with systems that cannot perform detection on the edge.

The system is programmable to trigger pre-alarms and alarms, based on different fixed temperatures or rate of rise for different regions of interest (ROI) to suit different environments. This way, one device can monitor multiple ROIs simultaneously and only trigger an alarm when a specific area reaches its defined fixed temperature or rate of rise.

ViSM (VIS-IR Software Management) allows for configuration and continuous monitoring of the protected area. Combined with both IR and Video feed, ViSM allows the situation to be assessed remotely and safely. This visual verification capability means that situations can be analyzed more accurately so that appropriate action can be taken sooner. So, there’s less danger, disruption, and downtime.

The earlier a fire is detected, the greater the opportunity to take action to reduce the danger to life, property, and business.

Xtralis VIS-IR incorporates a range of advanced features to optimize early detection, reduce false alarms, enhance reliability, and extend the range of operating environments where it can deliver maximum protection.

Early fire detection

• Multiple alarm and pre-alarm settings with fixed temperature and Rate of Rise triggers
• Multiple Regions of Interest with individually set pre-alarms/alarms

Reliable operation

• Smart camera enabling edge configuration with direct connection to the FACP and no networked PC required
• Onboard failsafe fault relays protecting the system against any fault conditions

Real-time monitoring

• Built-in software for real-time visual verification of alarms, enabling human situational assessment and targeted response
• Recorded video allowing post-event root cause analysis and corrective actions such as configuration settings adjustments

For tough environments

• Detection temperature range of
  -5°C to +450°C
• IP66 certified