The Fire Beam BLUE App Controlled Auto-Aligning Beam Detector (7-70m)
- Manufacturer : The Firebeam Company
- Part Code : FB-BLUE
- The Fire Beam BLUE App Controlled Auto-Aligning Beam Detector
- Covers 7 - 70m In Length As Standard
The Fire Beam BLUE App Controlled Auto-Aligning Beam Detector
Fire Beam BLUE Beam Detectors provide all the features of the Fire Beam Xtra but are commissioned and controlled using the Fire Beam BLUE app.
There are two key components to the Fire Beam system: the Fire Beam Head and the Fire Beam Reflector. It works by sending a signal from the head to the reflector. The reflector bounces the signal back to the head and, if the returning signal is obscured, a fire event is registered.
The Fire Beam BLUE uses auto alignment to align itself to the centre of the reflector when commissioning and will automatically keep alignment if there is any building movement.
The Fire Beam BLUE is reliable, easy-to-install and can be commissioned very quickly with automatic alignment taking just over three minutes to complete.
The Fire Beam BLUE supports seven different languages: English, German, Spanish, French, Italian, Dutch and Czech.
| Electrical Specifications: | |
|---|---|
| Supply Voltage | 12 to 30 Vdc normal |
| Supply Current | 5.5mA in all operational states |
| Supply Current | 13.5mA in fast commissioning |
| Environmental Specifications: | |
| Temperature | -10°C to +55°C |
| Humidity | 10 to 95% RH Non-condensing |
| Protection Index | IP65 when suitably mounted and terminated |
| Mechanical Specifications: | |
| Beam Head | H:180mm x W:155mm x D:137mm - Weight 1.1kg |
| 70KIT140 Mid-Range Reflector | H:293mm x W:293mm x D:5mm - Weight 0.8kg |
| 140KIT160 Long-Range Reflector | H:394mm x W:394mm x D:5mm - Weight 1.8kg |
| Adapter | H:270mm x W:250mm x D:5mm - Weight 0.6Kg (mounts the Beam Head onto Unistrut) |
| Optical Specifications: | |
| Optical Wavelength | 870nm |
| Maximum Angular Alignment | ±5° |
| Maximum Angular Misalignment | (static not auto-aligning) Beam Head ±0.4° / Reflector ±2° |
| Operational Specifications: | |
| Protection Range | |
| Fire Beam BLUE | Standard Product 7 to 70 metres. Use short range mask for distances between 7 & 20 metres |
| 70KIT140 | Mid-Range Reflector Kit 70 to 140 metres |
| 140KIT160 | Long Range Reflector Kit 140 to 160 metres |
| Alarm Sensitivity Levels | |
| 25% (1.25dB) to 50% (3dB) in 1% (0.05dB) increments (default 35% (1.87dB)) | |
| Alarm Condition: | |
| Obscuration drops to below pre-defined sensitivity level. | |
| Time to Alarm Condition adjustable between 2 to 30 seconds in 1 second increments (default 10 seconds) | |
| Alarm Indication: | |
| App Status - FIRE | |
| Head Red Flashing LED | |
| Alarm Relay Change Over (CO) Contact | |
| Rating 2A @ 30 VDC | |
| Test / Reset Features: | |
| Beam test function with App | |
| Alarm latching / auto-reset selectable (default auto-reset) | |
| Alarm reset in latching mode with App reset function, removing power for >5 seconds or momentarily apply >5 VDC to reset connections in Beam Head | |
| Fault Sensitivity Level: | |
| <4% | |
| Fault Condition: | |
| Obscuration drops to below the fault sensitivity level within 1 second | |
| Power Down or Supply Voltage < 9 VDC | |
| Commissioning modes, Pre-Alignment and Auto-Alignment | |
| Beam turned off during Beam Maintenance | |
| Time to Fault Condition adjustable, 2 to 60 seconds in 1 second increments (default 10 seconds) | |
| Fault Indication: | |
| App Status - FAULT | |
| Head Yellow Flashing LED 1 Second | |
| Fault Relay Change Over (CO) Contact Rating 2A @ 30 VDC | |
| Normal Condition: | |
| Obscuration level is above the Alarm sensitivity level | |
| App Status - NORMAL | |
| Programmable on/off | |
| Head Green Flashing LED | |
| Programmable on/off | |
| Auto-Align / Beam Contamination Compensation: | |
| Auto-align during normal operation if obscuration drops below 90% for the duration of the align time set (doesn't affect normal operating mode) | |
| Beam Contamination Compensation 4 hour monitoring. Compensation data available in the App | |
