System Sensor M201E Output Control Module Fire Alarm Addressable
SKU
M201EA
£45.45
£54.54
- Manufacturer : System Sensor
- Part Number : M201E
- Addressable Interface Module
- Single Output
- System Sensor Analogue Addressable Protocol
System Sensor M201E Interface
Features:
-
Analogue addressable communications
-
Built-in type identification automatically identifies the System Sensor M201E to the control panel
-
Stable communication technique with high noise immunity
-
Rotary decade 01 to 99 address switches
-
Common mounting options available including Surface Mount, Panel Mount and DIN Rail Mount.
-
Tri colour LED's
-
Powered directly by 2-wire loop. No additional power required
-
Plug-in terminal connections for ease of field wiring
Requires M200E-SMB Box - Please see related products below.
The System Sensor Output Control Module M201E is an Addressable Fire Alarm Interface Module unit that is specifically designed to be used on System Sensor Protocol Fire Alarm Systems.
The System Sensor Output Control Module M201E provides a monitored single output circuit for use with polarised loads (sounder circuit) which requires a suitable power source (7Vdc - 30Vdc) for the connected load. Alternatively the same device may be placed in to an unsupervised mode which can then be used to control any switched load up to 2A @ 30Vdc.
The System Sensor Output Control Module M201E use one of 99 available module addresses on a loop and responds to regular polls from the control panel reporting its type and the status (open/normal/short) of its supervised device circuit.
The System Sensor Output Control Module M201E has two rotary switches enable direct dial entry of DECADE address (01-99).
The System Sensor Output Control Module M201E also has a tri-colour LED on the module flashes green for normal and amber for fault indicating that the module is in communication with the System Sensor Fire Alarm Control Panel. The tri-colour LED for inputs latches steady red on alarm (subject to current limitations).
Write Your Own Review