Scope TLINKLT Telemetry System Kit for One-way Link - DL3-05-12V & RX10LT

Scope TLINKLT Telemetry System Kit for One-way Link - DL3-05-12V & RX10LT

T-Link takes a 5-zone DigiLink transmitter and combines it with a RX10 receiver and two aerials to produce an ‘off the shelf’ one-way radio link between fire or intruder panels. The transmitter has five input zones which can be triggered by volts-free opening or closing contacts or can be configured to accept ’voltage applied’ or ‘voltage removed’.

The system is supplied pre-configured to operate ‘change-of-state’, so a closing contact at the transmitter sends a signal to the receiver to activate the corresponding zone output relay. When the transmitter input is de-activated, the relay is deactivated so the output actually ‘follows’ the input. A programming kit is available if you need to reconfigure the system. Additional transmitters and receivers can be added when needed.

This can simply be achieved by installing Digilink transmitters and receivers adjacent to the fire or security panels where their relay contacts can be hard wired into the output/ inputs of the panel in order to provide wireless alarm signals between buildings. For roaming fire marshals and security personnel the serial output of the receiver can be connected to the Scope Connexions Range of paging transmitters in order to send pre-programmed text messages to pocket worn pagers.

It is also possible to connect the printer output of analogue addressable panel to a serial port of the Connexions transmitter in order to transmit real time panel messages to the pagers thus saving valuable time by not having to view the message at the panel. The same format could also be deployed for access control, plant monitoring, lone worker and care home applications where staff has to be made aware of situations arising from automated or manual inputs.