Notifier M701E Addressable Single Output Interface Module
SKU
M701E
£64.50
£77.40
-
Manufacturer : Notifier by Honeywell
-
Part Number : M701E
-
Analogue addressable communications
-
Stable communication technique with high noise immunity
-
Rotary decade 01 to 99 address switches
-
Tri colour LED's
-
Powered directly by 2-wire loop. No additional power required
-
Plug-in terminal connections for ease of field wiring
Notifier Single Output Interface Module M701 Addressable
The Notifier Single Output Interface Module M701 is an Addressable Fire Alarm Interface Module unit that is specifically designed to be used on Notifier Protocol Fire Alarm Systems.
The Notifier Single Output Interface Module M701 provides a monitored single output circuit for use with polarised loads (sounder circuit) which requires a suitable power source (7Vdc - 30Vdc) for the connected load. Alternatively the same device may be placed in to an unsupervised mode which can then be used to control any switched load up to 2A @ 30Vdc.
The Notifier Single Output Interface Module M701 use one of 99 available module addresses on a loop and responds to regular polls from the control panel reporting its type and the status (open/normal/short) of its supervised device circuit.
The Notifier Single Output Interface Module M701 has two rotary switches enable direct dial entry of DECADE address (01-99).
The Notifier Single Output Interface Module M701 also has a tri-colour LED on the module flashes green for normal and amber for fault indicating that the module is in communication with the Notifier Fire Alarm Control Panel. The tri-colour LED for inputs latches steady red on alarm (subject to current limitations).
Please Note : This product is for purchase as a spare / replacement part for existing Notifier systems. Any extensions to existing systems or brand new systems MUST be commissioned by a Notifier ESD engineer in order to maintain the validity of the manufacturers warranty on the equipment. Please contact us for details on commissioning services.