KAC MCP1A-R470SG Conventional / Non-Addressable Manual Call Point with Surface Back Box
- Buy 100 for £5.91 £7.09 each and save 15%
- Manufacturer : KAC
- Part Code : M1A-R470SG-STCK-01
- Conventional Manual Call Point
- Complete with Surface Backbox & Test Key
- Supplied with Frangible Glass Element
- Integral 470 Ohm Resistor
MCP1A-R470SG KAC Conventional / Non-Addressable Manual Call Point with Surface Back Box
Installation time and ultimately cost, are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique 'plug and play' concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple, but effective, with no re-termination required and no time wasted.
Through new standards and legislation, both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest 'flex-ability', the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.
All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.
Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard.
-
Fire Action Sign With Lift Information£2.09 £2.51
-
Fire Action Sign Jalite 5562D£4.97 £5.96
-
Jalite 5553DD Fire Action Sign - 200 x 300mm£9.45 £11.34
-
Jalite 5536D Fire Action Sign£4.97 £5.96
-
General Fire Action Sign With Lift Information£2.09 £2.51
-
Jalite 5553D Fire Action Sign£4.97 £5.96
-
Jalite 5403D Fire Action Sign£4.97 £5.96
-
Fire Action Sign Without Lift Information - 1427£2.09 £2.51