Klaxon TCC-0001 Intrinsically Safe Sonos Sounder - Red

The IS electronic sounder has been approved for use in potentially explosive atmospheres for Group I (Mining) & Group II (Above Ground) applications and incorporates a high Ingress Protected IP66 enclosure.

The sounder unit incorporates a two stage alarm option and has a total of 32 selectable tones, selectable via a dip switch on the PCB and produces up to 105dB at 1 Meter.

A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.

Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists & clicks into the pre-fixed base on commissioning avoiding any additional wiring & connections.

This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo: 28v, Io: 93mA, Po: 660mW, Ci: 0, Li 0. The minimum value of Uo should not drop below 23.6v and the minimum value of Io should not drop below 50mA.

Klaxon TCC-0001 Intrinsically Safe Sonos Sounder Features

• Approved by ATEX, IECEx
• Group I MI Ex ia I Ma
• Group II IGD Ex ia IIC T6 Ga, Ex ia IIIC T85˚C Da
• Zones 0, 1, 2, 20, 21 & 22
• Conforms to: EN 60079-0:2012 + All:2013 (IEC 60079-0:2011)
  EN-60079-11:2012 + (IEC 60079-11:2011)
• Diode Polarised & End of line resistor compatible
• White base version available MOQ apply
• Dustproof & Weatherproof

Certification: ATEX (EMT17ATEX0011X) IECEx (EMT 17.0004X)
Sounder: 2 Stage alarm with 32 Selectable tones
Beacon: 9 SMT LED’s with either 1 Hz flash rate or static (constantly ON) mode
IP Rating: IP66 Construction: Flame Retardant Polycarbonate
Operating Temp: -40ºC to +55ºC Humidity: >90% at 20ºC
Cable Entries: 3 x M20 Weight: 0.33kg