FireClass J408-2 Conventional Fire Alarm Control Panel - 2 Zone - 557.201.522

Please Note : This product is now obsolete and no longer in production. The manufacturer recommends using the Fireclass Essential 2 Zone Panel as an alternative.  Please see related products below.

The FireClass J408-2 is a 2 zone conventional fire alarm control panel.

Designed and made according to EN54 standards, the J408 is a microprocessor based control panel for small to medium applications. Each detection zone has an alarm-repeat output for selective management in the event of fire. The control panel has supervised, silenceable alarm-outputs for self-powered sirens, piezoelectric sirens, fire bells, flashers, telephone dialers,etc.

This easy-to-use control panel is protected by a lockable frontplate which allows operational access to authorized personnel only.

FireClass J408-2 Conventional Fire Alarm Control Panel Features

• EN54 approved
• Optional extinguishment module EN12094-1 approved
• Up to 32 devices can be connected to each zone
• Input for 4 – 20 mA gas detectors
• One alarm-repeat output (open collector) for each input zone
• Manual call point recognition
• Signals missing detectors
• 2 supervised, silenceable, bypassable 24 V alarm output for sounders
• Silenceable fault-warning output for the activation of signalling and auxiliary devices
• Supervised fire output for telephone dialer activation
• Programmable open-collector output
•  Dry contact alarm-relay for the activation of auxiliary devices
• Day/Night mode
• Alarm verification time
• Programmable restoral and reset times
• Programmable from PC or keypad
• 50 event log viewed via PC
• Alarm/fault memory activated until next reset
• Command for silencing sirens
• Keypad commands require key or pin code
• Repeater available