Apollo Conventional Detector & Base Range
The Apollo Conventional Detector range includes the Apollo Series 65 and Apollo Orbis selection of detectors. These detectors are suitable for use on most modern conventional type fire alarm systems. For more information on Apollo Detectors Call us NOW on 01200 428 410.
-
Apollo Series 65 Conventional Detectors & Bases View Products -
Apollo Orbis Detector Range - Conventional View Products
Apollo Fire Detectors and Base Range
Comprehensive range of Apollo Conventional / Non-Addressable Optical Smoke, Apollo Heat Detectors and Apollo Multi-criteria Smoke and Heat Detectors.
All devices are LPCB (Loss Prevention Council Approved) and designed for BS5839-1:2002 fire alarm systems.
Apollo Conventional Fire Alarm Detectors available from The Safety Centre.
Apollo Conventional Fire Alarm Detectors are a cost effective solution to providing a fully functioning fire alarm system in buildings. In conjuntion with conventional fire alarm panels and conventional fire alarm sounders a system fully compliant to BS5839 can be achieved. The detectors can be wired on a radial zone circuit direct from the main control panel.
On activation each smoke detector with send a signal to the conventional fire alarm control panel to operate the sounder and relays incorporated on the system. Each conventional fire alarm detector in the Apollo detector range incorporates a LED. This LED illuminates when the detector has detected either smoke or heat to aid in the location of the detection source.
If you're interested in our Apollo Conventional Detector range you may also be interested in our Fire Alarm Testing and Fire Alarm Systems ranges.
