Fike CIE-A-200 Single Loop Addressable Fire Alarm Control Panel - 520-0001
- Manufacturer : Fike
- Part Code : CIE-A-200 (520-0001)
- Single Loop Analogue Addressable Fire Panel
Fike CIE-A-200 Single Loop Addressable Fire Alarm Control Panel
The CIE-A-200 Addressable Fire Alarm Control Panel is a one loop panel capable of supporting up to 200 devices* with a maximum loop length of 2KM, the panel also provides two configurable monitored input circuits, 2 configurable monitored output circuits, 2 configurable + 1 fault relay and also a Peripheral bus circuit to add up to 8 repeater panels.
The system may be configured utilising 3 alarm stages with full ‘Zone to Zone’ Cause and Effect across all 32 panel zones with provision to include alarm confirmation and delay timers. An additional 32 output zones are also provided for more complex Cause and Effect programming.
The CIE-A-200 control panel is compatible with Fike’s addressable range of devices and utilizes soft addressing principles eliminating the need for the installer to physically address each device whilst also eradicating time spent on faults caused by duplicate addressing. The operating parameters of the devices are configured either from the panel or via the OSP programming software and are then stored within the Flash memory of the device itself. This enhanced digital protocol means less information is needed to be sent between the detector and the host control panel, resulting in faster, more reliable communication.
Key Features
- 1 loop addressable fire alarm panel
- Compatible with Fike's ASD addressable range of devices
- Faster and easier installation
- Improved and easier to use OSP software
- Simple, yet intuitive end user interface
- Enhanced service and fault-finding tools
- Utilises soft addressing to eliminate physical address changes at each device
- Faster, more reliable communication between panel and devices
- Supports up to 200 Fike addressable devices
- Supports a maximum loaded loop length of 2km
- Accommodates 32 fire zones and 32 I/O zones
- Fire and fault event log up to 1000 events
- Provides configurable monitored input and output circuits, configurable relays and fault relay
- Peripheral bus circuit to add up to 8 repeater panels
- LCD graphical user display
Technical Specification
- Dimensions Panel (W x H x D): 353mm x 333mm x 117mm
- Mains Supply Input: 230V AC Nominal
- Standby Battery Requirement: 2 x 7Ah 12V Sealed Lead Acid (2 x 12 Ah with extended battery box)
- Max Number of Loops: 1
- Loop Loading: 450 DLU (200 Devices Max)
- Number of Supported Zones: 32
- LCD Display: LCD Graphical Display
- Device Labels: 31 Character
