EDA-M300 Electro Detectors Millennium Radio Signal Repeater Panel
SKU
EDA-M300
£947.20
£1,136.64
- Manufacturer : Electro Detectors
- Part Number : EDA-M300
- Wireless Signal Repeater / Booster Panel
- Compatible with the EDA-M100 & EDA-M150 Control Panels
- Operating Frequency : 173Mhz
- Max Battery Size : 1 x 7Ah 12V Battery
EDA-M300 Electro Detectors Millennium Signal Repeater Panel
PLEASE NOTE : Electro Detectors Millennium & Old Type Zerio Fire Alarm Equipment Will Be Available To Order Until The End of March 2021 - After This Date It Will Be Made Completely Obsolete By The Manufacturer.
EDA-M300 Electro Detectors Millennium Radio Signal Repeater Panel
- Relays the radio signals from the device to the main control panel
- Controls local devices
- Ensures that all neccessary information are forwarded to the control panel
- Includes two relay contacts
PLEASE NOTE: The EDA-M300 is used in association with the EDA-M100 and EDA-M150 main control panels only.
The purpose of the EDA-M300 Electro Detectors Millennium Radio Signal Repeater Panel is to relay the radio signals around a site from the radio devices to the main control panels. This will be neccessary when the radio fire alarm devices are out of the range of the main radio control panel.
The booster/repeater panel indicates only supply healthy and whether there is a fault relating to the panel. Its function is to control any local devices.
Should a fault or alarm condition occur from one of the local devices then the relevant information is sent around the network to control panels on the system. When the system is not in a fault or alarm condition the booster/repeater panels send data around the network indicating to the control panels how the system is performing.
This allows all system data to be available at the main control panel when an engineer arrives on site. Each repeater panel includes two relay contacts that can be configured to drive sounder circuits (0.5 amps each) or as auxillary relays (No or Nc).
Write Your Own Review
