EDA-A2102 Zerio Radio Booster / Sounder Module - Electro Detectors

PLEASE NOTE : This product is now obsolete and no longer in production.

EDA-A2102 Zerio Radio Booster / Sounder Module - Electro Detectors

Designed to complement the range of EDA Zerio range of Radio Fire Alarm equipment, the EDA-A2102 booster is capable of bi-directional message transmissions between compatible Zerio devices and a control panel, thus substantially increasing the system range. Up to four EDA-A2102 units can be used and each repeater must be in range of the Main Control Panel as boosters cannot communicate with each other.

The Booster is powered from an external separate mains transformer (not included - see related items below) that provides the DC voltage as required by the repeater with built in overload protection. It is mounted in a double gang surface mounted box with a Fused Connection Unit (FCU) front plate as pictured over.

Airwaves are continuously monitored by the repeater for any instructions from the Main Control Panel or devices so that all valid messages are transmitted on.

Communication link integrity is constantly checked with frequent transmissions between the repeater and the Main Control Panel on which any errors are immediately displayed.

Any internal faults such as unit removal, battery low, receiver failure or mains failure are relayed back to the Main Control Panel.

The control panel controls the units verify table, continually adding and removing devices that either in or out of range of the main control panel. No set up is required by the engineer.

The unit has the same functionality as a standard sounder with the additional features of repeating messages from devices in radio range of the unit. It is supplied with a stub antenna, and is capable of operating with a larger external antenna.