Chat with us, powered by LiveChat

C-Tec CA730 CAST Addressable Input Output Interface Module

SKU
CA730
£42.05 £50.46
Enquire about this product
  • Manufacturer : C-Tec
  • Part Code : CA730
  • Input / Output Interface Module
  • Uses C-Tec CAST Analogue Addressable Protocol

C-Tec CA730 CAST Input Output Interface

The C-Tec CA730 is an addressable input output interface module using the C-Tec CAST analogue addressable protocol.

C-Tec CA730 CAST Addressable Input Output Interface Features

  • LPCB certified to EN54-17 & 18 and Kiwa Telefication certified to EN54-13.
  • Incorporates the functions of a switch monitor, zone monitor and output unit.
  • Can be configured to monitor any combination of:-
    • Up to 20 conventional detectors & 10 MCPs
    • Any normally open switch with an EOL resistor fitted.
    • A simple normally open or closed switch (non-fault monitored).
  • Onboard short-circuit loop isolator.
  • 5.5mA typical alarm current (1.3mA typical quiescent current) @ 22-40V DC.
  • Indicators for Loop polling, input faults and relay status.
  • Can switch 1A@30V DC (or 0.3A@125V AC)
  • Includes volt free changeover contacts that can be used to trigger rollershutter doors, gas shut-off valves, smoke vents, etc.
  • Mountable on a C-TEC NCP-26 surface box or a standard UK 25mm double gang back box (not supplied).
Write Your Own Review
You're reviewing:C-Tec CA730 CAST Addressable Input Output Interface Module
Your Rating

Our Brands

  • Apollo Logo
  • Ctec Logo
  • Electro Detectors Logo
  • Notifier Logo
  • STI Logo
  • Yuasa Logo
  • Apollo Logo
  • Ctec Logo
  • Electro Detectors Logo
  • Notifier Logo
  • STI Logo
  • Yuasa Logo