Apollo RW1900-901APO REACH Wireless Manual Call Point

The Apollo RW1900-901APO is a wireless analogue addressable manual call point. The unit has a resettable plastic element, which displays a drop-down warning indicator when operated. A key is supplied with the MCP for reset and case opening. A transparent cover protects against accidental operation is available as an accessory (not included).

• Resettable Element
• Bi-directional wireless communication
• Dual channel redundancy

Operating Principles

The Apollo RW1900-901APO REACH Wireless Manual Call Point is a wall-mounted device that, when activated, initiates an alarm on the fire security system. After its use the call point unit can be simply reset with its proper key, making it immediately ready for reactivation.

Status LED

When one or more faults are present in the system they are shown on the LCD and the fault LED is switched on yellow.  LCD is ON only when the tamper switch is not activated (cover open) regardless of the configuration of the translator tamper fault.

Device Addressing

Device addressing is handled by the REACH Wireless Loop-Interface device (RW1700-030APO).

Devices are soft-addressed automatically when pairing with the Loop Interface and can be changed manually. Hard-addressing using Apollo XPERT cards are not supported.

Communication

Apollo REACH Wireless Devices use ‘radio-frequency’ wireless communication to connect to the Loop-Interface.

The Loop-Interface (RW1700-030APO) translates the wireless communication into wired Apollo protocol communication, with each device addressable individually by the fire panel.