Apollo RW1700-052APO Reach Wireless Output Interface Module

The RW1700-052APO REACH Wireless Output Module is a wireless analogue addressable interface which allows simple integration of third-party equipment with the fire system. The unit is powered entirely from its internal battery supply and is fitted as standard with both a set of change over relay contacts and a 12/24V dc output. The output is capable of supplying power for operating low current third party equipment directly from the internal batteries.

• Input circuits are fully supervised for alarm and fault conditions
• Bi-directional wireless communication
• Dual channel redundancy

Operating Principles

The Apollo RW1700-051APO REACH Wireless Input module works on an ON/OFF logic and does not rely on any special and/ or intelligent communication protocol for its operation (i.e conventional call-points).

Status LED

When one or more faults are present in the system they are shown on the LCD and the fault LED is switched on yellow.  LCD is ON only when the tamper switch is not activated (cover open) regardless of the configuration of the translator tamper fault.

Device Addressing

Device addressing is handled by the REACH Wireless Loop-Interface device (RW1700-030APO).
Devices are soft-addressed automatically when pairing with the Loop Interface and can be changed manually.

Communication

Apollo REACH Wireless Devices use ‘radio-frequency’ wireless communication to connect to the Loop-Interface. The Loop-Interface (RW1700-030APO) translates the wireless communication into wired Apollo protocol communication, with each device addressable individually by the fire panel.