Advanced QZXL-32 Quickzone XL 32 Zone Conventional Fire Alarm Control Panel

The Advanced QZXL-32 is a 32 Zone conventional fire alarm control panel.

This panel features an integral power supply and space for appropriate standby batteries.  The panel extends the QuickZone range with the same high levels of quality and reliability, as well as remaining easy to install, maintain and simple to use for the end user

It features 32 zone circuits as well as four monitored sounder circuits, complete with 500mA resettable fuses. Fire and fault VFCO relays along with fire, fault, disablement and reset programmable switched negative outputs. Class change and alert inputs are also available.

DIL switches within the panel are used to allow Zone Interface setting and also to allow access to level 3.  Dependency modes A, B and C are available to help reduce false alarms. The panel is very cost effective and even allows for one man walk tests.

In Level 1, the panel can indicate any faults present (supply, fire, system, general and repeater), as well as reporting on the status of the whole system (Fire, disablements, Fire routing active, auxiliary and sounder output status).  It will also clearly indicate if in Test mode.

Level 2 access enables the Resound, Silence and Reset controls.  Disable and Test modes can also be established in this level. This level also permits the muting of the internal buzzer and the ability to test the functionality of all the LED indicators.

In access Level 3, it is possible to select sounder resound options for zones, (EN54 requirement), as well as permitting the user to view and edit dependency functions. Factory settings can be restored, the event log viewed and access provided to panel wide settings, including access codes and delays to outputs.

Advanced QZXL-32 Quickzone XL Conventional Fire Alarm Control Panel Features

• 3 Modes to manage false alarms
• One man walk test
• Key-switch or code entry for access
• Three year warranty as standard
• Space for two 18AHr batteries
• Integral 5 Amp switch mode PSU
• Programmable relays & outputs
• Approved to EN54-2 & 4
• Network up to 8 control panels
• Four monitored sounder circuits
• Class change & alert, programmable inputs
• Fire alarm routing output
• Test mode with or without sounders
• Integral detector removal monitoring
• Spacious enclosure for easy installation and cabling