Advanced QZXL-12 Quickzone XL 12 Zone Conventional Fire Alarm Control Panel
- Manufacturer : Advanced Electronics
- Part Code : QZXL-12
- Quickzone 12 Zone Conventional Fire Alarm Panel
- Colour Coded Buttons For Ease Of Use / Training
- Panel Dimensions : H 300 x W 450 x D 85mm
- Batteries Supplied Separately
Advanced QZXL-12 Conventional Fire Alarm Control Panel
The Advanced QZXL-12 is a 12 Zone conventional fire alarm control panel. It is capable for use as a standard conventional or twin wire (sav-wire) operation panel.
This panel features an integral power supply and space for appropriate standby batteries. The panel extends the QuickZone range with the same high levels of quality and reliability, as well as remaining easy to install, maintain and simple to use for the end user
Up to 12 fire zone circuits are provided plus two monitored sounder circuits. Fire and fault VFCO relays, Fire & Fault switched negative outputs, class change and an alert input are also included. The fire zone outputs can be set as 'Twin Wire' by DIL switch selection. The DIL switches are also used to allow Zone interface setting and Access to Level 3 mode. Dependancy modes A, B & C available
In Level 1, the panel will indicate if there are any faults (Supply, Fire, System, General & repeater). As well as this, the panel is capable of indicating zones in Fire, Fault and disablements and delay status. Auxiliary Output and Sounder status will be shown including if the panel is in test mode.
Controls enabled in Level 2 include Resound, Silence and Reset. Disable and Test modes can also be eastablished at this level, as wll as muting the internal buzzer and testing the functionality of all the LED indicators.
In access Level 3, it is possible to select sounder resound options for zones (EN54 requirement), select Type 'A' dependancy per, view and edit dependancy functions as well as restore factory settings. The buzzer volume can also be set and the event log viewed. Panel wide settings, including access codes and delays. Two Additional monitored sounder outputs, programmable switched negative outputs and one programmable relay available with high specification expansion card.
Advanced QZXL-12 Quickzone XL Conventional Fire Alarm Control Panel Features
- Twin Wire selection by DIL switch Fully
- Approved to EN54-2 & 4
- Three year warranty as standard
- Integral 3 Amp switch mode PSU
- Class Change & Alert programmable inputs
- Programmable relays and outputs
- Test Mode (with or without sounders)
- Alarm load of 2.4A shared across all sounder outputs
- Modular expansion zone cards available
- 2 Additional sounder circuits with high spec expansion card (supplied separately)
- Fully functional repeater panels available
- Can support up to 8 repeater panels
- Key-switch or code entry for activation of controls
- Space for up to 7.0Ah batteries
- Two monitored sounder circuits fitted as standard
- Integral detector removal monitoring