Advanced QZ-2 Quickzone 2 Zone Conventional Fire Alarm Control Panel

The Advanced QZ-2 is a 2 Zone conventional fire alarm control panel.  It is capable for use as a standard conventional or twin wire (sav-wire) operation panel.

This panel features an integral power supply and space for appropriate standby batteries.  The panel extends the QuickZone range with the same high levels of quality and reliability, as well as remaining easy to install, maintain and simple to use for the end user

Two fire zone circuits are provided plus two monitored sounder circuits. Fire and fault VFCO relays, Fire & Fault switched negative outputs, class change and an alert input are also included. The fire zone outputs can be set as 'Twin Wire' by DIL switch selection.  The DIL switches are also used to allow Zone interface setting and Access to Level 3 mode.

In Level 1, the panel will indicate if there are any faults (Supply, Fire, System or General).  As well as this, the panel is capable of indicating zones in Fire, Fault and disablements. Auxiliary Output and Sounder status will be shown including if the panel is in test mode.

Controls enabled in Level 2 include Resound, Silence and Reset.  Disable and Test modes can also be established at this level, as wll as muting the internal buzzer and testing the functionality of all the LED indicators. In access Level 3, it is possible to select sounder resound options for zones (EN54 requirement), select Type 'A' dependancy per, view and edit dependancy functions as well as restore factory settings.  The buzzer volume can also be set.

QuickZone panels support a large range of conventional detectors including Apollo, Argus, Hochiki & Nittan.

QuickZone panels are full approved to European Standards EN54-2 & 4, Fire detection and Alarm Systems - Control & Indicating Equipment.

Advanced QZ-2 Quickzone Conventional Fire Alarm Control Panel Features

• Twin Wire selection by DIL switch
• Approved to EN54-2 & 4
• 3 year warranty as standard
• Simple colour coded buttons for controls and programming
• Integral 1 amp switch mode PSU
• Class change & alert inputs
• Fire & fault relays 2 monitored sounder circuits
• Test mode
• Space for up to 3.2Ah batteries
• Key-switch or code entry for activation of controls